Greenville MI Pipe Bends

Manufactures distribution boxes, PVC flexible hoses, round slide gates, ball valves, and more! Call 989-248-3249

Click a product link below to learn more!

Tubing | Pipe | Tube Bends | Pipe Bends |  Standard Tube & Pipe Adapters
Special Tube & Pipe Adapters | Shot Peening | Spiral Grooving | ID and OD Polishing
Ceramic Lining
| Ceramic Coating | Compression Couplers | O-Ring Couplers
Special CouplersCam & Groove Couplers & AdaptersCam & Groove Quick Disconnect Assemblies

Cam & Groove Compression Nut Assemblies | PVC Flexible Hose | High Temp Flexible Hose
Metal Flexible Hose | Hose ClampsInstallation ComponentsVacuum WandsVacuum Probes
Distribution Boxes | Sight Glasses | Railcar Unloading Accessories | Round Slide Gates
Manual Square Gates | Aluminum Slide Gates | Ball Valves | Material Level Indicators
Line Vac Conveyors | Drum & Gaylord Covers

Tubing

  • Standard sizes of 1-1/2” to 8” outer diameter. See table for details. Please inquire about pricing and availability on larger sizes.
  • Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel
  • Common wall thicknesses are 11, 14, and 16 gauge.
  • Standard length is 20’, but we will cut to customer specification.

Size (Outer
Diameter)

Material(s) Available in these wall
thicknesses:

1-1/2”

1-1/2”

1-3/4”

2”

2”

2-1/8”

2-1/4”

2-1/2”

2-1/2”

3”

3”

3-1/2”

3-1/2”

4”

4-1/2”

5"

6"

8"

Aluminum, Stainless Steel, Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel, Carbon Steel

Aluminum, Stainless Steel, Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel, Carbon Steel, Galvanized
Steel

Aluminum, Stainless Steel, Carbon Steel

Aluminum, Stainless Steel, Carbon Steel

Galvanized Steel 

Aluminum, Stainless Steel, Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel, Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel, Carbon Steel, Galvanized
Steel

Aluminum, Stainless Steel, Carbon Steel

Aluminum, Stainless Steel, Carbon Steel, Galvanized
Steel

Aluminum, Stainless Steel, Carbon Steel, Galvanized
Steel

Aluminum, Stainless Steel, Carbon Steel, Galvanized
Steel

11, 14, 16

11, 16

11, 14, 16

11, 14, 16

16

11, 16

11, 14, 16

11, 14, 16

11, 16

11, 14, 16

11, 16

11, 14, 16

11, 16

11, 14, 16

11, 14

11, 14

11, 14

11, 14

Tube Wall Thickness Key
16 Gauge = .065”
14 Gauge = .083”
12 Gauge = .109”
11 Gauge = .120”

Back To Top


Pipe

  • Standard sizes of 1” to 8” nominal pipe size. See table for details. Please inquire about pricing and availability on larger sizes.
  • Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel
  • Common wall thicknesses are Schedules 5, 10, 40, and 80.
  • Standard lengths are 20’ and 24’ depending on size and schedule, but we will cut to customer specification.
Size (Nominal
Pipe Size)
Actual Outer
Diameter
Material(s) Available in these
wall thicknesses:

1”

1”

1”

1-1/4”

1-1/4”

1-1/2”

1-1/2”

1-1/2”

2”

2”

2-1/2”

2-1/2”

3”

3”

3-1/2”

3-1/2”

4”

4”

4”

5”

5”

5”

5”

6”

6”

6”

8”

8”

8”

1.315”

1.315”

1.315”

1.66”

1.66”

1.90”

1.90”

1.90”

2.375”

2.375”

2.875”

2.875”

3.50”

3.50”

4.00”

4.00”

4.50”

4.50”

4.50”

5.563”

5.563”

5.563”

5.563”

6.625”

6.625”

6.625”

8.625”

8.625”

8.625”

Stainless Steel

Aluminum

Carbon Steel

Stainless Steel

Carbon Steel, Galvanized Steel

Aluminum

Stainless Steel, Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel, Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel

Carbon Steel

Aluminum, Stainless Steel, Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel

Carbon Steel

Aluminum

Stainless Steel, Carbon Steel

Galvanized Steel

Aluminum

Stainless Steel

Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel

Carbon Steel

Galvanized Steel

Aluminum, Stainless Steel

Carbon Steel

Galvanized Steel

Sch 5, 10, 40, 80

Sch 40

Sch 40, 80

Sch 40, 80

Sch 40

Sch 10, 40

Sch 10, 40, 80

Sch 40

Sch 5, 10, 40

Sch 40

Sch 5, 10, 40

Sch 5, 10, 40, 80

Sch 5, 10, 40, 80

Sch 40

Sch 5, 10, 40

Sch 5, 10, 40, 80

Sch 5, 10, 40

Sch 5, 10, 40 , 80

Sch 40

Sch 10, 40

Sch 5, 10, 40

Sch 10, 40 ,80

Sch 40

Sch 10, 40

Sch 10, 40, 80

Sch 40

Sch 10, 40

Sch 10, 40 , 80

Sch 40

Tube / Pipe Cross Reference Key
3”NPS SCH 5 = 3-1/2” OD 14 GAUGE
3” NPS SCH 10 = 3-1/2” OD 11 GAUGE
3-1/2” NPS SCH 5 = 4” OD 14 GAUGE
3-1/2” NPS SCH 10 = 4” OD 11 GAUGE
4” NPS SCH 5 = 4-1/2” OD 14 GAUGE
4” NPS SCH 10 = 4-1/2” OD 11 GAUGE

Back To Top


Tube Bends

  • Standard sizes of 1-1/2” to 8” outer diameter.
  • Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel.
  • Common wall thicknesses are 11, 14, and 16 gauge.
  • Available in 90 degree, 60 degree, 45 degree, and 30 degree.
  • See table below for standard center line radii and tangent lengths.
  • Please inquire about price and availability on any size, degree, or radius not listed.
Size (Outer
Diameter)
Common Center Line Radii (Inches) Standard
Tangent
Wall Thickness
(Gauge)

 1”

1-1/4”

1-1/2”

1-3/4”

2"

2-1/8”

2-1/4”

2-1/2”

2-3/4”

3"

3-1/4”

3-1/2”

3-3/4”

4"

4-1/4”

4-1/2”

4-3/4”

5"

5-1/2”

6"

8"

3, 6

3, 7.25

2.5, 6, 7.5, 9, 12, 15, 18, 24, 30, 36

2.5, 8, 9, 12, 15, 24, 30, 36, 48

2.5, 5, 6, 8, 8.5, 9, 10, 12, 15, 18, 24, 30, 36, 48 

5, 12, 24, 30, 36

3, 9, 12, 15, 17, 24, 30, 36

4, 6, 9, 12, 15, 17, 24, 30, 36, 48

17, 30, 36, 48

4.5, 7.5, 9, 10, 12, 15, 18, 24, 30, 36, 48, 60

17, 30, 36

6, 8.75, 12, 15, 16, 18, 24, 30, 36, 48

17, 24, 32, 36

6, 10, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60

16, 30, 36, 48

6, 9, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60

36

7.5, 12.5, 17, 22, 24, 30, 36, 42, 48, 60

30, 36

9, 15, 24, 30, 36, 42, 48, 60, 72

12, 20, 32, 48, 60, 72

4”

4”

4”

4”

4”

4-1/4”

4-1/2”

5”

5-1/2”

6"

6-1/2”

7"

7-1/2”

8"

8-1/2”

9"

9-1/2”

10"

11"

12"

16"

11, 14

11, 14

11, 14, 16

11, 14, 16

11, 14, 16

11, 14, 16

11, 14, 16

11, 14, 16

11

11, 14, 16

11

11, 14, 16

11

11, 14, 16

11

11, 14, 16

11

11, 14

11

11, 14

11, 14

Tube Wall Thickness Key
16 Gauge = .065” • 12 Gauge = .109”
14 Gauge = .083” • 11 Gauge = .120”

Back To Top


Pipe Bends

  • Standard sizes of 1” to 8” nominal pipe size.
  • Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel.
  • Common wall thicknesses are Schedules 5, 10, 40, and 80.
  • Available in 90 degree, 60 degree, 45 degree, and 30 degree.
  • See table below for standard center line radii and tangent lengths.
  • Please inquire about price and availability on any size, degree, or radius not listed.
Nominal
Pipe
Size
Actual Outer
Diameter
Common Center Line Radii (Inches) Standard
Tangent
Wall Thickness
(Schedule)

 1”

1-1/4”

1-1/2”

2"

2-1/2”

3"

3-1/2””

4"

5"

6"

8"

1.315”

1.66"

1.9"

2.375"

2.875"

3.5"

4"

4.5"

5.563"

6.625"

8.625"

3, 5

3.5, 4, 6.25

5, 6, 7.5, 9, 10, 12, 18, 24, 30, 36, 48

6, 7.5, 10, 12, 15, 17, 24, 30, 36, 48

12, 12.5, 15, 17, 24, 30, 36, 60

6, 8.75, 12, 15, 16, 18, 24, 30, 36, 48

6, 10, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60 

6, 9, 12, 16, 18, 20, 24, 30, 32, 36, 48, 60

15, 20, 24, 30, 36, 42, 48, 60, 72

24, 30, 36, 42, 48, 60, 72

24, 32, 40, 48, 60, 72

4”

4”

4”

4”

5"

6"

7"

8"

10"

12"

16"

5, 10, 40

5, 10, 40

10, 40 

5, 10, 40

5, 10, 40

5, 10, 40, 80

5, 10, 40

5, 10, 40, 80

10, 40, 80

10, 40

10, 40

Tube / Pipe Cross Reference Key
3”NPS SCH 5 = 3-1/2” OD 14 GAUGE
3” NPS SCH 10 = 3-1/2” OD 11 GAUGE
3-1/2” NPS SCH 5 = 4” OD 14 GAUGE
3-1/2” NPS SCH 10 = 4” OD 11 GAUGE
4” NPS SCH 5 = 4-1/2” OD 14 GAUGE
4” NPS SCH 10 = 4-1/2” OD 11 GAUGE

Back To Top


Standard Tube & Pipe Adapters

  • 1” to 8” OD Tube Sizes, 1” to 8” NPS Pipe Sizes
  • Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel.
  • 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10, 40 Pipe Walls
  • Please inquire about price and availability on any size not listed.

Mitered ElbowsMitered Elbows

OD A Dim. B Dim.
1-1/2” 6” 6”
2” 6” 6”
2-1/2” 6” 6”
3” 6” 6”
3-1/2” 7” 7”
4” 8” 8”
5” 10” 10”
6” 12” 12”
8” 16” 16”

TeesTees

OD / NPS E Dim. F Dim.
1-1/2”- 4” 16” 8”
4-1/2” 18” 9”
5” 18” 9”
6” 20” 10”
8” 24” 12”

WyesWyes

OD / NPS 30 Deg 45 Deg 60 Deg
C Dim D Dim C Dim D Dim C Dim D Dim
1-1/2”- 4” 8” 8” 8” 8” 8” 8”
4-1/2” 10” 10” 10” 10” 10” 10”
5” 11” 11” 11” 11” 11” 11”
6” 12” 12” 12” 12” 12” 12”
8” 14” 14” 14” 14” 14” 14”

LateralsLaterals

OD / NPS 30 Deg 45 Deg 60 Deg
A Dim B Dim A Dim B Dim A Dim B Dim
1-1/2”- 2-1/2” 8” 16” 8” 16” 8” 16”
3”- 3-1/2” 10” 20” 8” 16” 8” 16”
4” 12” 24” 10” 20” 10” 20”
5” 15” 30” 12” 24” 12” 24”
6” 18” 36” 15” 30” 15” 30”
8” 22” 40” 18” 36” 18” 36”

* Laterals are also available in 15 degree.

Back To Top


Special Tube & Pipe Adapters

Line Size Adapters (Also called concentric reducers.)

  • Line Size Adapter1” to 8” OD Tube Sizes, 1” to 8” NPS Pipe Sizes
  • Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel.
  • 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10, 40 Pipe Walls
  • Please specify OD and wall thickness for both ends when ordering.

Parallel Laterals (Also called parallel wyes or diverter wyes.)Parallel Laterals

OD 30 Deg 45 Deg
F Dim C Dim F Dim C Dim
1-1/2” 6” 23.69” 6” 19.94”
2” 6” 24” 6” 20.5”
2-1/2” 6” 24.31” 6” 21”
3” 6” 24.81” 6” 21.75”
3-1/2” 6” 25.19” 6” 22.38”
4” 8” 33.06” 8” 29”
5” 10” 41.31” 10” 36.19”
6” 12” 45.63” 12” 39.44”
8” 14” 50.69 14” 43.94”

Please call for information on parallel laterals in pipe sizes. Dimensions listed are typical. We can fabricate to your specifications.

3-Pc. Mitered Bends (Also called segmented elbows.)Mitered Bends

OD A Dim. E Dim.
1.5” 6” 11.75”
2” 6” 12.25”
2-1/2” 6” 12.75”
3” 6” 13.25”
3-1/2” 6” 13.75”
4” 6” 14.25”
5” 6” 15.25”
6” 8” 18.25”
8” 8” 20.25”

Please call for information on 3-pc. Mitered Bends in pipe sizes. Dimensions listed are typical for 90 degree bends. We can fabricate to your specifications, and in many other degrees.

Manifolds

Manifolds

OD A Dim. B Dim. C Dim. D Dim.
2” 6” 8” 50.25” 6”
2-1/2” 6” 10” 60” 5.5”
3” 6” 12” 69.25” 5”
4” 6” 16” 87.50” 6”

Please call for information on Manifolds in pipe sizes. Dimensions listed are typical for this type of manifold. We can fabricate to your specifications, and in many other configurations (see graphic above).

Bifurcated Elbows (Also called bifurcated wyes.)Bifurcated Elbow

  • 1” to 8” OD Tube Sizes, 1” to 8” NPS Pipe Sizes
  • Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel.
  • 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10, 40 Pipe Walls.
  • All common degrees of bend and center line radii available.

Flanged Stubs

Flanged Stubs

Flanges used are ½” thick, 150 lb., with standard ANSI bolt patterns.

OD A Dim. B Dim.
1-1/2” 6” 5”
2” 6” 6”
2.-1/2” 6” 7”
3” 6” 7.5”
3-1/2” 6” 7.5”
4” 6” 9”
5” 6” 10”
6” 6” 11”
8” 6” 13.5”

Tube to Pipe Thread AdaptersTube to Pipe Thread Adapters

  • 1-1/2” through 10” sizes.
  • 16, 14, 11, 12 Gauge wall thicknesses.
  • Aluminum, Carbon Steel, Stainless Steel, Galvanized (Zinc-Coated) Steel
OD Male NPT Female NPT
Length NPT Length NPT
1-1/2” 6” 1-1/2” 6” 1-1/2”
2” 6” 2” 6” 2”
2-1/2” 6” 2-1/2” 6” 2-1/2”
3” 6” 3” 5-1/4” 3”
3-1/2” 6” 3-1/2” 6” 3-1/2”
4” 6” 4” 6-1/2” 4”
5” 6-1/2” 5” 6-3/4”” 5”
6” 7” 6” 7” 6”
8” 8” 8” 9” 8”
10” 10” 10” 10” 10”

Tube & Pipe Plate FlangesPlate Flanger

  • 2” through 12” OD and NPS sizes.
  • Slip-on, flat face style.
  • ½” thick, 150 lb. Drilling.
  • ANSI standard bolt patterns.
  • Aluminum, Carbon Steel, Stainless Steel, Galvanized (Zinc-Coated) Steel

Drop TeesDrop Tees

  • Combines a tee and a mitered elbow in one fabrication.
  • Common sizes are 1-1/2” to 4” OD tube, 2” to 4” NPS pipe
  • Standard in Aluminum and Stainless Steel, Carbon Steel and Galvanized Steel by special order.

End CapsEnd Caps

  • For capping material lines, a 6” length of tube or pipe with one end capped off. Install using compression coupler (sold separately).
  • Common sizes are 1-1/2” to 4” OD tube, 2” to 4” NPS pipe
  • Standard in Aluminum and Stainless Steel, Carbon Steel and Galvanized Steel by special order.

O-Ring End CapsO-Ring End Caps

  • Faster and more economical than fabricated end caps. One half of an O-ring coupler w/ one end capped.
  • Common sizes are 1-1/2” to 4” OD tube, 2” to 4” NPS pipe.
  • Standard in Galvanized Steel

End PlugsEnd Plugs

  • An economical alternative to end caps. Sold in pipe sizes, but will accommodate many tube sizes.
  • Flexible rubber collar expands against tube or pipe wall as wing or hex nut is tightened
  • Common sizes are 1-1/2” to 4” OD tube, 1” to 4” NPS pipe.

Slip Couplings Slip Couplings (also called Slip Sleeves or Solid Sleeves)

  • For tube only, a sleeve that fits over tube or fitting ends, and is either glued welded or covered with a shrink sleeve.
  • Standard sizes are 1-1/2” to 10” OD Tube
  • For use in systems under 15PSI.

*Inquire about heat shrinkable polyolefin shrink sleeves. Eliminate gluing brazing and welding.

OffsetsOffsets

  • Frequently used with parallel lateral adapters.
  • Common sizes are 1-1/2” to 4” OD tube, 2” to 4” NPS pipe.
  • Standard in Aluminum and Stainless Steel, Carbon Steel and Galvanized by special order.
  • When ordering, please specify center to center distance, as well as tube or pipe size and wall thickness.

Tube Wall Thickness Key
16 Gauge = .065”
14 Gauge = .083”
12 Gauge = .109”
11 Gauge = .120”

Tube / Pipe Cross Reference Key
3”NPS SCH 5 = 3-1/2” OD 14 GAUGE
3” NPS SCH 10 = 3-1/2” OD 11 GAUGE
3-1/2” NPS SCH 5 = 4” OD 14 GAUGE
3-1/2” NPS SCH 10 = 4” OD 11 GAUGE
4” NPS SCH 5 = 4-1/2” OD 14 GAUGE
4” NPS SCH 10 = 4-1/2” OD 11 GAUGE

Back To Top


Shot Peening (for Straights and Bends)

Shot peening is a cold working non-directional process in which the surface of a part is bombarded with small spherical media called shot. Each piece of shot striking the material acts as a tiny peening hammer, imparting to the surface a small indentation or dimple. The resulting pattern of dimples creates turbulence and serves to promote better material flow.

Back To Top


Spiral Grooving (for Straights and Bends)

Spiral GroovingInternal spiral-grooved straights and pipe and tube bends increase turbulence of materials passing through the system to reduce clogging due to angel hair or stringers. Available in:

  • Aluminum and stainless steel
  • Sizes range from 2" O.D. through 8" IPS

Back To Top


ID and OD Polishing

Provides smooth ID and/or OD (180 Grit) surface for stainless steel bends and fittings used in sanitary or ornamental applications. Additional grades of polishing are available for aluminum, stainless, and carbon steel bends and fittings.

Back To Top


Ceramic Lining

Ceramic Lining

A uniform coating of specially formulated ceramic material added to the inside diameter of straights, bends, or fittings to create a very hard, slippery glass-like surface.

  • Available for stainless steel and carbon steel only.
  • Maximum treatable straight length is 12 ft.

Back To Top


Ceramic CoatingCeramic Coating

A wear-resistant ceramic compound, approximately ½” thick, is applied to the outside of a bend or fitting. An exterior fiberglass wrap maintains the grip and strength of the ceramic material.

  • Available for most standard bends and fittings.
  • This “ceramic jacket” has a Mohs Hardness of 9 with diamond at 10, the highest.

Back To Top


Compression CouplersCompression Couplers

  • For tube sizes 1” OD to 24” OD, pipe sizes ½” to 12”.
  • Constructed of heavy-gauge zinc-plated steel. Please inquire about pricing and availability on stainless steel and aluminum couplers.
  • Standard gasket material is red rubber or black neoprene. Also available in white neoprene and other materials.
  • Furnished standard with stainless steel grounding strips. Aluminum strips also available.
  • Stainless steel gasket protectors available at slight extra charge.
  • When ordering, please specify pipe or tube size, number of bolts, gasket material, and whether gasket protector is required.
  • Replacement gaskets available.

Back To Top


O-Ring CouplersO-Ring Couplers

  • For tube sizes 1-1/2” OD to 4-1/2” OD, pipe sizes 2” to 4”.
  • Constructed of corrosion resistant galvanized steel.
  • Standard O-ring material is black nitrile. Also available in Viton.
  • Available in 4” to 8” lengths, depending on OD / NPS.
  • 20% lower cost and 30% quicker installation than standard compression couplers.
  • When ordering, please specify pipe or tube size, length required, and O-ring material.
  • Replacement O-rings available.

Back To Top


Special CouplersSpecial Couplers

  • Side Band Compression Couplers – maximum holding power , sizes from 2” OD to 24” OD.
  • Quickon Couplers – quick install & removal, stainless steel construction, sizes 1-1/2” to 12-3/4” OD.
  • Gripper Couplers – single & double wing-nut designs, positive-sealing gum gaskets, stainless steel construction, sizes 1-1/2” to 12-3/4” OD.

Back To Top


Cam & Groove Couplers & Adapters

  • Standard sizes range from 1” to 6”. Please call for pricing and availability on 8” and 10”.
  • Common materials are aluminum, stainless steel, and brass. Ductile iron and polypropylene available by special order.
  • Standard threads are NPT. BSP and BST available on request.
  • Replacement gaskets and arms available.
  • Brass and stainless steel security chains available in 6” and 12” length.

Cam & Groove Couplers

Back To Top


Cam & Groove Quick Disconnect AssembliesCam & Groove Quick Disconnect Assemblies

  • Male and female camlocks welded to short lengths of tubing for ease of installation.
  • Size ranges are 1-1/2” through 6” OD tube in 11, 14, and 16 gauge, 2” through 6” pipe in schedule 5, 10, and 40.
  • Available in aluminum and stainless steel.

Back To Top


Cam & Groove Compression Nut AssembliesCam & Groove Compression Nut Assemblies

  • Quick-change male and female camlock assemblies with compression nuts.
  • Requires no welding or epoxy.
  • Sizes are 1-1/2” to 3”.
  • Available for 16 gauge (.065”) wall tube only.

Back To Top


PVC Flexible HosePVC Flexible Hose

  • Six different types to meet varying conveying requirements, most in 25’, 50’, and 100’ lengths.
  • Standard duty, clear, smooth bore PVC hose in sizes 1-1/2” to 6” ID,
  • Standard duty, clear, smooth bore PVC hose with static-dissipating ground wire, 1-1/2” to 6” ID.
  • Heavy duty, clear, smooth bore PVC hose, sizes 1-1/2” to 8” ID.
  • Heavy duty, clear, smooth bore PVC hose, with static wire, sizes 1-1/2” to 8” ID.
  • Standard duty polyurethane, abrasion-resistant PVC hose, black, 1-1/2” to 8” ID, formulated with anti-static compound.
  • Heavy duty polyurethane, abrasion-resistant PVC hose, blue, 1-1/2” to 8” ID, formulated with antistatic compound.

Back To Top


High Temp Flexible HoseHigh Temp Flexible Hose

  • A light weight, non-kinking flexible silicone ducting that is chemically treated & helicallywound, with woven fiberglass fabric covering.
  • Designed for low – medium pressure handling of air, dust, fumes, and light powders where higher temperatures are required.
  • Temperature range from 65F – 600F.
  • Available in single or two plies (Sil 1 and Sil 2), steel wire helix, ironoxide red, ranging from 1” – 12” I.D.
  • Standard length, 12’.
  • Not recommended for handling liquid or abrasive material.

Back To Top


Metal Flexible HoseMetal Flexible Hose

  • Available in two types: general purpose unlined and smoothbore lined.
  • Standard sizes range from 1-1/2” to 8” ID with many strip thicknesses available.
  • Common materials are galvanized and stainless steel. Limited sizes in aluminum.
  • Various strip packing materials can be provided if required.
  • Hose assemblies, with ends, either epoxied or welded, also available. Typical ends include cam locks, pipe and tube stubs, and flanges.

Back To Top


Hose ClampsHose Clamps

  • Spiral Double Bolt Clamps – Specifically designed for a spiral hose. Available in both clockwise and counter-clockwise. Sizes range from 1-1/2” to 10”. A common material is galvanized steel; stainless steel is available.
  • Worm-Drive Hose Clamps – General purpose stainless steel hose clamps. Multiple sizes available.

Back To Top


Installation ComponentsInstallation Components

  • Strut Channel – Standard size is 1-5/8” x 1-5/8”. Slotted. Galvanized. Available in 10’ and 20’ lengths.
  • Threaded Rod – 3/8” and ½" diameters. 6’ and 12’ lengths. Galvanized.
  • Strut Tube and Pipe Clamps – Tube sizes 1-1/2” to 8” OD, pipe sizes 2” to 8”. Galvanized. Includes slotted hex head screw and nut.
  • Beam Clamps – For 3/8” and ½” threaded rod. Galvanized. With set screw.
  • Rod Couplers – Couplers to accommodate 3/8” and ½” rod.
  • Spring Nuts – 3/8”-16 and ½”-13
  • Hex Nuts, Flat Washers, and Lock Washers – 3/8” and ½” sizes.

* Please inquire about any items or sizes not listed here.

Back To Top


Vacuum Wands (also called Vertical Probes)Vacuum Wands

  • For unloading powder or pellets. Choose from three models with a variety of options, pictured at left:
  • Basic Model – Six air register holes for air flow adjustment and stand-off ring.
  • Standard Model – Adjustable air flow collar and standoff ring.
  • Deluxe Model – Adjustable air flow collar, stand-off ring, operator handle, and cam lock end.
  • All models available in sizes ranging from 1-1/2” to 4” OD, and in 48” and 54” lengths.
  • Common materials are aluminum and stainless steel.

* Please inquire about any sizes or materials not listed here.

  • Also available, plastic shock-free wands, shown below.
  • Lightweight, durable high-impact polymer construction.
  • Four models to choose from, with a variety of airflow options.
  • Available in sizes ranging from 1-1/2” to 4” OD, and 51” length.

Back To Top


Vacuum Probes Vacuum Probes (also called Horizontal Probes)

  • Mounts in distribution box ports to unload material.
  • Standard with air adjustment collar and filter screen.
  • Standard sizes range from 1.5” to 4”
  • Common materials are aluminum and stainless steel.

* Please inquire about any sizes or materials not listed here.

Back To Top


Distribution Boxes Distribution Boxes (also called Air Vacuum Boxes or Air Take-Away Boxes)

  • Mounts underneath storage bins and silos.
  • Standard with 12” square opening and 16-1/2” square flange.
  • Available in 1-port to 6-port designs.
  • Common materials are aluminum and stainless steel.

* Please inquire about any sizes or materials not listed here. ** Actual product may differ slightly from pictures.

Back To Top


Sight GlassesSight Glasses

  • Provides a clear view of material flow.
  • Design features smooth “straight-thru” inner surface.
  • Includes permanently attached grounding strip to eliminate static build-up.
  • Fast easy installation using compression couplers (sold separately).
  • Standard with clear acrylic tubes. Please inquire about price and availability for Pyrex sighting tubes.
  • Available with aluminum or steel ends in tube or pipe.
  • Tube end sizes from 1-1/2” to 6” OD in 16 and 11 gauge wall thicknesses.
  • Pipe end sizes from 2” to 6” with schedule 40 wall.
  • Schedule 5 and 10 available by special order.

Back To Top


Railcar Unloading AccessoriesRailcar Unloading Accessories

  • Unloading Nozzles – Standard with air flow control collar. Aluminum or stainless steel construction. Sizes range from 2” to 6”. Available with male or female cam lock coupling.
  • Opposite Side Filter Assemblies – Mounts opposite nozzle to filter incoming air during the unloading process. Features removable replaceable filter element.
  • Alternative Opposite Side Filters – Conical insert filters. Spun bonded nylon with molded ring. Washable and reusable.
  • Railcar Hatch Filter – Mounts over hatch to allow filtered air to enter railcar during unloading process. Fits standard 20” railcar hatch.
    Cartridge filter element is accessible for cleaning or replacement.

Back To Top


Round Slide GatesRound Slide

  • Mounts in material line for application where absolute airtight seal is not required.
  • Self-cleaning.
  • Round knurled plastic knob for micro blade adjustment
  • Standard in painted carbon steel. Aluminum and stainless steel also available.
  • Common sizes from 2” to 8” OD.

Please inquire about larger sizes.

Back To Top


Manual Square GatesManual Square Gates

  • Heavy duty 3” channel carbon steel construction.
  • Slide gate is 10 Gauge AR Steel.
  • Opening sizes range from 4” to 15” square.
  • Flanges can be drilled to customer specified bolt pattern.
  • Designed for gravity application. Not recommended for pressure applications.
  • Many optional square to round transitions available.

Please inquire about larger sizes.

Back To Top


Aluminum Slide GatesAluminum Slide Gates

  • Mounts under storage bins and silos, providing convenient material flow control.
  • All aluminum construction with 10” handwheel operator.
  • 12” square opening, 16-1/2” square flange with standard bolt pattern.

Please inquire about larger sizes.

Back To Top


Ball ValvesBall Valves

  • Forged brass body and cap.
  • Chrome-plated ball, nickel-plated stem.
  • Standard with female NPT threaded ends. Solder ends also available in some sizes.
  • Seats and seals are virgin PTFE.
  • Standard with vinyl-coated steel handle. Handle options include round handles, extension handles, and locking devices.
  • Automated valves also available by special order.

* Actual product may differ slightly from picture.

Back To Top


Material Level Indicators

Rotary Paddle Bin MonitorRotary Paddle Bin Monitor

  • Mounts in top or side of bins to provide point level monitoring of dry bulk materials.
  • Rotating paddle stops when impeded by material, starts again in absence of material, producing an electrical signal to indicate each condition.
  • Cast aluminum housing with twist off cover and two conduit entrances.
  • A variety of paddle assemblies available.
  • Accessories include flexible couplings, mounting plates, shaft extensions, and shaft guards.

Plumb Bob Silo MonitorPlumb Bob Silo Monitor

  • Standard configuration consists of the SMU, a cable-based sensor unit, mounted on silo roof, and connected to the HMI control and data display unit.
  • Continuous level monitoring by measuring the amount of cable that is required to lower plumb bob to the material surface.
  • 2, 8, and 16 channel HMI ‘s can be programmed to provide values for level, volume, weight, and percent.
  • A variety of mounting flanges, cables, and plumb bobs available.
  • Also available, PC-based inventory management software with remote monitoring via LAN, Internet / WAN, or dial-up.

Back To Top


Line Vac ConveyorsLine Vac Conveyor

  • Compressed air operated Line Vac connects to standard hose or tube to create a powerful in-line conveyor.
  • Compact. Quiet. No moving parts.
  • Can be purchased as a single unit, or kit that includes mounting bracket, filter separator, pressure regulator, and coupling kit.
  • Available in aluminum for 11 line sizes 3/8” to 5”, in stainless steel for 10 line sizes 3/8” to 4”.
  • Special models available including High Temperature, Flanged, and Miniature.

Back To Top


Drum & Gaylord Covers

Drum ConveyorDrum & Gaylord Filter Covers improve the quality of molded parts by preventing contamination of in-process material. They provide easy access and the ability to make quick visual level checks. Filter Covers reduce mess and housekeeping labor associated with transferring of material from central loaders and grinders.

  • Constructed of blue Dacron polyester which allows the cover to breathe.
  • Access port is 8” tall and can be sized to fit all common wands. Specify 1 or 2 ports. Ports include an elastic band for tight seal and zipper to close the opening when not in use.
  • Elastic band around the skirt holds the cover in place.
  • Clear vinyl windows allow quick visual level checks.
  • Can be ordered to fit all common Gaylord and drum sizes.

Back To Top

Contact All Line Components, LLC in Greenville MI today.

Service Areas Include: Michigan, Indiana, New York, Wisconsin, Ohio and Coast to Coast